Toxic Flammable Gas Detection Systems
Gas exposure can be fatal. During everyday life, we will be exposed to a wide range of gasses, which when at low concentration levels, or when carefully controlled & monitored do not pose any danger. But a build up of combustible gas caused by a leak can cause an explosion. Or a build up of toxic gas, such as carbon monoxide can be fatal.
With this in mind Zeta Alarm Systems have developed the Gas Sense range of gas detectors.This innovative detector can run as a self contained stand alone detector, or it can be linked to a central monitoring panel where up to 48 detectors can be connected. The detectors can be for the same gas, or for mixed gasses.
In its initial release, detectors will be available for the following gases:-
Toxic Gases
- Chlorine
- Hydrogen Sulphide
- Ammonia
- Nitric Oxide
- Nitrogen Dioxide
- Sulphur Dioxide
- Carbon Monoxide
- Carbon Dioxide
- Oxygen
Combustible Gases
- N-Butane
- N-Heptane
- N-Hexane
- N-Pentane
- Propane
- Methane
- Ethyl Acetate
- Isopropyl Alcohol
- Ethanol
- Acetone
The modular nature of the design will allow for further gasses to be added in the future.
Simplicity Gas Sense Multiple Gas Control Panel
The Simplicity Gas Sense Controller (ZGS100) has been designed to monitor and control 48 gas sense detectors.
In addition to this, it can run Zeta addressable I/O units, and the range of Zeta addressable sounders. It has a 4 x 40 character LCD display which helps display all the required device information on the screen.
From the user menu, the status of each detector can be viewed, and its gas concentration level observed. This remote monitoring and checking facility is useful if there are many detectors spread across a wide area on the system.
The system can be divided into 8 zones, allowing detectors to be grouped either by gas type, or by building area.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZGS100 | Simplicity Gas Sense Multiple Gas Control Panel |
Toxic Gas Sense Detectors In Standard Industrial Enclosure
The Zeta Gas Sense detector is a 24V gas detector that can run either in stand alone mode, or can be connected to a control panel for the centralised monitoring of several detectors.
This range of detectors covers a wide number of toxic gases in a standard industrial enclosure which are not suitable for hazardous areas.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZS-CL2/20 | Chlorine (CL2) Gas Sense Detector | |
| ZS-H2S/100 | Hydrogen Sulphide (H2S) Gas Sense Detector | |
| ZS-NH3/100 | Ammonia (NH3) Gas Sense Detector, 0-100ppm | |
| ZS-NH3/300 | Ammonia (NH3) Gas Sense Detector, 0-300ppm | |
| ZS-NH3/1000 | Ammonia (NH3) Gas Sense Detector, 0-1000ppm | |
| ZS-NH3/5000 | Ammonia (NH3) Gas Sense Detector, 0-500ppm | |
| ZS-NO/100 | Nitric Oxide (NO) Gas Sense Detector, 0-100ppm | |
| ZS-NO/300 | Nitric Oxide (NO) Gas Sense Detector, 0-300ppm | |
| ZS-NO2/30 | Nitrogen Dioxide (NO2) Gas Sense Detector | |
| ZS-SO2/20 | Sulphur Dioxide (SO2) Gas Sense Detector | |
| ZS-CO/300 | Carbon Monoxide (CO) Gas Sense Detector, 0-300ppm | |
| ZS-CO/1000 | Carbon Monoxide (CO) Gas Sense Detector, 0-1000ppm | |
| ZS-O2/25% | Oxygen (O2) Gas Sense Detector |
Toxic Gas Sense Detectors In Flameproof Enclosure With ATEX Approved Sensors
The Zeta Gas Sense detector is a 24V gas detector that can run either in stand alone mode, or can be connected to a control panel for the centralised monitoring of several detectors.
This range of detectors covers a wide number of toxic gases in a flameproof industrial enclosure which are suitable for hazardous areas.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZSFP-CL2/20 | Chlorine (CL2) Gas Sense Detector | |
| ZSFP-H2S/100 | Hydrogen Sulphide (H2S) Gas Sense Detector | |
| ZSFP-NH3/100 | Ammonia (NH3) Gas Sense Detector, 0-100ppm | |
| ZSFP-NH3/300 | Ammonia (NH3) Gas Sense Detector, 0-300ppm | |
| ZSFP-NH3/1000 | Ammonia (NH3) Gas Sense Detector, 0-1000ppm | |
| ZSFP-NH3/5000 | Ammonia (NH3) Gas Sense Detector, 0-500ppm | |
| ZSFP-NO/100 | Nitric Oxide (NO) Gas Sense Detector, 0-100ppm | |
| ZSFP-NO/300 | Nitric Oxide (NO) Gas Sense Detector, 0-300ppm | |
| ZSFP-NO2/30 | Nitrogen Dioxide (NO2) Gas Sense Detector | |
| ZSFP-SO2/20 | Sulphur Dioxide (SO2) Gas Sense Detector | |
| ZSFP-CO/300 | Carbon Monoxide (CO) Gas Sense Detector, 0-300ppm | |
| ZSFP-CO/1000 | Carbon Monoxide (CO) Gas Sense Detector, 0-1000ppm | |
| ZSFP-CO2/5000 | Carbon Dioxide (CO2) Gas Sense Detector, 0-5000ppm | |
| ZSFP-CO2/5% | Carbon Dioxide (CO2) Gas Sense Detector, 0-2.5%ppm | |
| ZSFP-CO2/10% | Carbon Dioxide (CO2) Gas Sense Detector, 0-5%ppm | |
| ZSFP-O2/25% | Oxygen (O2) Gas Sense Detector |
Combustible Gas Sense Detectors In Flameproof Enclosure With ATEX Approved Sensors
The Zeta Gas Sense detector is a 24V gas detector that can run either in stand alone mode, or can be connected to a control panel for the centralised monitoring of several detectors.
This range of detectors covers a wide number of combustible gases in a flameproof industrial enclosure which are suitable for hazardous areas.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZSFP-BU/1.8% | N-Butane (C4H10) Gas Sense Detector | |
| ZSFP-HEP/1.05% | N-Heptane (C7H16) Gas Sense Detector | |
| ZSFP-HEX/1.02% | N-Hexane (C6H14) Gas Sense Detector | |
| ZSFP-PEN/1.4% | N-Pentane (C5H12) Gas Sense Detector | |
| ZSFP-PRO/2.1% | Propane (C3H8) Gas Sense Detector | |
| ZSFP-MTE/5.0% | Methane (CH4) Gas Sense Detector | |
| ZSFP-ELA/2.2% | Ethyl Acetate (C4H8O2) Gas Sense Detector | |
| ZSFP-IPA/2.2% | Isopropyl Alcohol (C3H8O) Gas Sense Detector | |
| ZSFP-ENL/3.3% | Ethanol (C2H6O) Gas Sense Detector | |
| ZSFP-ACE/2.6% | Acetone (C3H6O) Gas Sense Detector |
Further Information Links
